|
NO.
|
Shade
|
No.
|
shade
|
|
095
|
Extender
|
1047/703
|
Utra-black
|
|
098
|
Thixotropism
|
6E
|
Thinner(NVP)
|
|
300
|
Pale-yelow
|
ST305
|
Hardner
|
|
310/710
|
Middel yellow
|
702
|
white
|
|
320/720
|
Golden yellow
|
701
|
Black
|
|
330/730
|
Orange
|
410
|
Process K
|
|
340/740
|
Scarlet
|
420
|
Process M
|
|
350/750
|
Dark red
|
430
|
Process Y
|
|
360/760
|
Rose
|
450
|
Process C
|
|
370/770
|
Voilet
|
ST156
|
Thinner(no NVP)
|
|
380/780
|
Blue
|
H 19/3
|
Hardner
|
|
390/790
|
green
|
G 19/2
|
Hardner
|
|
1051/604
|
Utra white
|
1221
|
Varnish
|
|
|
|
|
| Usage︰ | POLYCOLOR series which means that the ink used to, UV curable high gloss inks. For the flame-treated or semi-rigid material or PE material, PP bottles, plates, self-adhesive PVC stickers, PET bottles and other aspects of printing. treated surface tension of the bottle should be up to 38 dyne / cm. The low viscosity ink for fine mesh with. |
| Production Advantage ︰ | * Waterproof:
In most cases, POLYCOLOR have good waterproof ink, can be improved by adding hardener ST305 waterproof ink. Joined the ratio of 3-5%; ST 305 by adding a ratio of 3-5%; the curing agent can also increase ink adhesion to the surface of some material. hardener added time after the ink used 4-8 hours.
* Hiding:
Shading end of the expected role of the color of the ink and the ink layer thickness changes. In general, expected at the end when the ink was diluted by screen printing thick cover after the end of the expected sex ratio without fine point by After screen printing the cover of the stronger. In this case, adding 3-5% shading white material, can enhance the ink cover, but does not affect the color of the ink shades. |
| Use Method︰ | POLYCOLOR is an instant-ink. but if necessary can be added to enhance the UV thinner 6E difficult in some printing inks can be printed on the surface of materials such as PVC surface printing. join a ratio of 5-10 %. POLYCOLOR activity of good ink, ink completely cured after good results can be obtained. PE material will depend on the surface properties of the material, if necessary, you can use some of the coarse mesh. In this Circumstances, should pay attention to adding the right amount of bottom material, to obtain more adequate ink deposition.
|
| Storage︰ | POLYCOLOR ink factory for 2 years after the storage period. on the deployment of ink. a 1-year validity. requirements of ink stored in dry, ventilated chamber, the temperature range of 10-30 ℃. |
|
|
|
