Hard hat is a kind of hat used to protect the head from impact damage, and is widely used in construction sites, extreme sports, underground operations and other occasions. The shape of the helmet is an irregular oval, so it is more common to use a pad printer for printing. If the helmet only prints single-color or multi-color on one part, an ordinary shuttle pad printer can meet the requirements, but there are many The hard hat requires printing in many parts, so a shuttle pad printer with a servo-controlled workbench is an ideal choice.
The most common materials for safety helmets are ABS, PE, PC, glass fiber, etc., which are relatively difficult to print. First, use non-processing ink for testing. If the effect is not satisfactory, flame treatment can be considered.
Six colors pad printer with shuttle//Structure
Working table
6-station shuttle-type working table
Shuttle stroke
125mm
Ink supply system
90mm diameter Closed cup type system
Plate type
0.3mm Thin steel sheets plate
Pad dropping control
Simple-cylinder , Continue pressing
Ink drying
Heat air
Six colors pad printer//Usage and characters
Guide
Print both one color to six colors with shuttle worktable， overprint is more precision.
With sealed cup to store ink, saving ink and environment protection ;
With coin aluminum structure ensure more stabilization and long life.
Independent sealed cup driving device, Ink removing completely . Make min Pressure to remove ink;
Can print almost small size objects. So sold very nice in the world.
Widely used in the industry field of cosmetics case, electron parts, Toys, plastics production, Housewares, gifts, decorations.
Completely printing solution including ink and thinner, fixtures, steel plates, rubber pads provided when you send us samples to send..
Independent cup driven cylinder ensure ink remove clean.
Summary︰
Hard hat is a kind of hat used to protect the head from impact damage, and is widely used in construction sites, extreme sports, underground operations and other occasions. The shape of the helmet is an irregular oval, so it is more common to use a pad printer for printing. If the helmet only prints single-color or multi-color on one part, an ordinary shuttle pad printer can meet the requirements, but there are many The hard hat requires printing in many parts, so a shuttle pad printer with a servo-controlled workbench is an ideal choice. The most common materials for safety helmets are ABS, PE, PC, glass fiber, etc., which are relatively difficult to print. First, use non-processing ink for testing. If the effect is not satisfactory, flame treatment can be considered.
