|
No.
|
Shade
|
No.
|
Shade
|
|
920
|
Lemon
|
956
|
Bright blue
|
|
922
|
Pale yellow
|
960
|
Turquoise
|
|
924
|
Midium yellow
|
962
|
Grass green
|
|
926
|
Orange
|
970
|
White
|
|
930
|
Vermilion
|
980
|
Black
|
|
932
|
Scarlet
|
191
|
Silver
|
|
934
|
Deep red
|
192
|
Golden
|
|
936
|
Fuchsine
|
193
|
Golden
|
|
940
|
Brown
|
429
|
Process yellow
|
|
950
|
Purple
|
439
|
Process magenta
|
|
952
|
Ultramarine
|
459
|
Process cyan
|
|
954
|
Middle blue
|
489
|
Process black
|
|
|
|
|
| Usage︰ | Excellently suited to print onto pre-treated PE and PP, but also onto PU, PA, melamine resins, phe-nolic resins, metal, anodized aluminum, var-nished surfaces,wood, and glass.
Use this machine on POM ( hostaform and Derlin) , Please dry it with Drying closet about 300-400 ℃ time for 3 - 4 seconds. |
| Production Advantage ︰ | 1) 1-component ink and drying can be used as two-component ink used. As a two-component ink, the ink drying speed depends on the speed of response and hardening agent. The higher the temperature, the faster the drying rate. In the fast printing, the first film has not been fully cured ink printed before.
If dried at room temperature, print should be printed after the previous 48 hours (when using hardener TPH1) or 8 hours (with hardening agent TPH2) for. The use of ink and the curing temperature is not lower than 15 ℃, otherwise it will result in irreversible damage. Also, because of the humidity-sensitive hardening agent in within a few hours after the high humidity should be avoided.
2 TPU series of ink fade resistance using only a strong resistance to fading paint. With varnish or other color ink (especially the white ink) mixed deployment, its fade resistance and wind resistance will be due to the deployment of the proportion of different degrees of weakening. Printing ink thinner will weaken their resistance to fading. For outdoor use, must be used hardener TPH1. TPU ink pigments used by a solvent-resistant plastic and features.
3 compression of the completely dry, the ink film was very good adhesion, scratch resistance and anti-adhesion, but also a large number of chemicals, oil, grease and solvent resistant. But the glass does not have the washability printing (which recommended the Marabu GL ink).
|
| Warm Presentation ︰ | Because printing materials vary widely, the specific application, should first be pre-press test, and then a formal production.
|
|
|
|
