There are two kinds of thickness: one is 0.5mm, used by open inkwell pad printer, the other is 0.25mm, used by pad printer with resin plate.
Packing︰
Paper Case
Usage︰
Used by Open ink-tray pad printer to remove the ink on the surface of pad plate after coating ink with ink roller
Technical Parameter︰
1. Dimension：18×350mm 2. Thickness of Knife edge： 0.01mm 3. Thickness of knife back：0.03mm 4. Hardness： 58－62 Degree
Production Advantage ︰
Well wear resistance; Uniformity cutting edge; Very nice Rigidity; Wedge model section form and easy to remove the ink.
Use Method︰
1. Check the quality of cutting of edge of blade; 2. Cut a more width than the pad plate installed on pad printer by a plier; 3. Install it to the nip of pad printer and fic it; 4. Adjust the pression between blade and plate.
Safe Caution︰
Sharp cutting edge to break skin easily , Please avoid touching it carefully
Storage︰
1. Wrap it with paper or PVC film 2. Keep smooth state and prevent rustiness
Statment : All the contents of this website are copyright protection of the People's Republic of China law, without following Dongguan KC printing machiner limited, prior written permission shall not copy, distribute and dissemination, exhibit, publish, or radio. You may not copy, in the content change or delete any trademark, Copyrights, logo or other instructions. You may, however, you are permited downloading and printing from the website for personal non-commercial purposes, the authorized the company legal adviser will takeforensic investigation, and actions to take necessary measures for any infringement of copyright my company website .
